spec no: dsaf1865 rev no: v.1 date: apr/07/2005 page: 1 of 3 approved: j. lu checked: allen liu drawn: y.w.wang erp:1102003734 package dimension s wp934zh/srd super bright red description the super bright red source color devices are made with gallium aluminum arsenide red light emitting diode. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice. t- 1 (3mm) right angle led indicator features i.c. compatible. wide viewing angle. high reliability life measured in years. ul rating : 94v - 0. housing material: type 66 nylon. rohs compliant.
spec no: dsaf1865 rev no: v.1 date: apr/07/2005 page: 2 of 3 approved: j. lu checked: allen liu drawn: y.w.wang erp:1102003734 selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3 . 5mm below package base. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 wp934zh/srd super bright red (gaalas) red diffused 110 300 40 symbol parameter device typ. max. test conditions units peak peak wavelength super bright red 660 nm i f =20ma d dominant wavelength super bright red 640 nm i f =20ma ? 1/2 spectral line half - width super bright red 20 nm i f =20ma c capacitance super bright red 45 pf v f =0v;f=1mhz v f forward voltage super bright red 1.85 2.5 v i f =20ma i r reverse current super bright red 10 ua v r = 5v parameter super bright red units power dissipation 100 mw dc forward current 30 ma peak forward current [1] 155 ma reverse voltage 5 v operating/storage temperature - 40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsaf1865 rev no: v.1 date: apr/07/2005 page: 3 of 3 approved: j. lu checked: allen liu drawn: y.w.wang erp:1102003734 super bright red wp934zh/srd remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters.
|
